本帖最後由 gary8349 於 2016-9-21 12:36 編輯
AU3 寄送Gmail信件 無法成功
請問要如何在不啟用安全性較低的應用程式存取權的前提下達成？
（如果啟用是可以成功的）
感恩~
網上找到的代碼稍稍修改成gmail的- #include <file.au3>
- Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
- Global $oMyRet[2]
- Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
- Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0)
- $objEmail = ObjCreate("CDO.Message")
- $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
- $objEmail.To = $s_ToAddress
- Local $i_Error = 0
- Local $i_Error_desciption = ""
- If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
- If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
- $objEmail.Subject = $s_Subject
- If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
- $objEmail.HTMLBody = $as_Body
- Else
- $objEmail.Textbody = $as_Body & @CRLF
- EndIf
- If $s_AttachFiles <> "" Then
- Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
- For $x = 1 To $S_Files2Attach[0]
- $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
- If FileExists($S_Files2Attach[$x]) Then
- $objEmail.AddAttachment($S_Files2Attach[$x])
- Else
- $i_Error_desciption = $i_Error_desciption & @LF & 'File not found to attach: ' & $S_Files2Attach[$x]
- SetError(1)
- Return 0
- EndIf
- Next
- EndIf
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
- ;Authenticated SMTP
- If $s_Username <> "" Then
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
- EndIf
- If $ssl Then
- $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
- EndIf
- ;Update settings
- $objEmail.Configuration.Fields.Update
- ; Sent the Message
- $objEmail.Send
- If @error Then
- SetError(2)
- Return $oMyRet[1]
- EndIf
- EndFunc ;==>_INetSmtpMailCom
- Func MyErrFunc()
- $HexNumber = Hex($oMyError.number, 8)
- $oMyRet[0] = $HexNumber
- $oMyRet[1] = StringStripWS($oMyError.description, 3)
- ConsoleWrite("### COM Error ! Number: " & $HexNumber & " ScriptLine: " & $oMyError.scriptline & " Description:" & $oMyRet[1] & @LF)
- SetError(1); something to check for when this function returns
- Return
- EndFunc ;==>MyErrFunc
- ;==================================================================================
- $s_SmtpServer = "smtp.gmail.com" ;SMTP伺服器
- $s_FromName = "Test" ;郵件發送人,隨便寫
- $s_FromAddress = "Test@gmail.com" ;郵件發送者地址
- $s_ToAddress = "Test@gmail.com" ;收件人地址
- $s_Subject = "我是測試信件" ;郵件標題
- $as_Body = "您好，這是測試信件" ;郵件正文
- $s_AttachFiles = "" ;附件位址
- $s_CcAddress = "" ;抄送地址
- $s_BccAddress = "" ;密件副本地址
- $s_Username = "Test" ;用戶名
- $s_Password = "Test123" ;密碼
- $IPPort = 465 ;發送埠，Gmail使用的發送埠為465，一般為25
- $ssl = 1 ; enables/disables secure socket layer sending - put to 1 if using httpS
- $rc = _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject, $as_Body, $s_AttachFiles, $s_CcAddress, $s_BccAddress, $s_Username, $s_Password, $IPPort, $ssl)
- If @error Then
- MsgBox(0, "郵件發送失敗", "錯誤代號:" & @error & " 描述:" & $rc)
- EndIf
- ;=====================================================================================
|
狗仔卡
發表於 2016-9-21 12:35
按個讚
收藏
分享
提升卡
置頂卡
變色卡
發表於 2016-9-21 16:59
樓主